E-mail us 


PATTERSON 13.7 cu. ft. (.39 cu. m) ThoroBlender® System complete with Disintegrator and Dust-Take-Off for Glass Manufacturing.
PATTERSON 3'6" (1.19m) body dia. 13.72 cu. ft (.39 cu. m) capacity Stainless Steel ThoroBlender® for Water Treatment Chemicals Producer.
PATTERSON 7'0" (2.13m) body dia. 110 cu. ft. (3.12 cu. m) Heavy-Duty ThoroBlender® for Magnesium Powder Blending Operation.
 
PATTERSON 19'6" (5.94m) body dia. 2463 cu. ft. (69.75 cu. m) capacity ThoroBlender® under construction.
PATTERSON 4'0" (1.22m) body dia. 20.3 cu. ft. (.58 cu. m) capacity ThoroBlender® for a Snack Food Blending Operation.

 

PATTERSON Change-Cone® Blender combines a single, stationary drive unit with multiple, high efficiency, double cone PATTERSON ThoroBlenders®.  Ideal for batch or intermittent blending cycles of varying materials or formulations.

 

Conventional fork lift truck removes, attaches, transports free-standing cones in minutes.  The use of a single drive unit with multiple cones reduces capital investment, cuts idle equipment to a minimum.

USE SEVERAL DOUBLE CONES WITH ONE DRIVE UNIT TO:

·    Avoid cross contamination.
·    Pre-blend explosive products that cannot be readily 
     handled by dumping and transporting.
·    Pre-blend and store for use as needed.
·    Handle custom blending and small run applications.

ADDITIONAL DRIVE UNITS AND CONES CAN BE ADDED  AS NEEDS INCREASE.

 

DOUBLE CONES ARE EASY TO CLEAN

 

Smooth interior surface and the absence of sharp corners, flights and vanes, reduces cleaning time to a minimum.  Elimination of carry-over from batch to batch through the use of separate double cones for different products prevents contamination, reduces danger of corrosion.

 


PATTERSON ThoroBlender® Trunnions being machined.

PATTERSON Change Cone ThoroBlender® Yoke being machined.
PATTERSON 1'6" diameter, stainless steel 304, 1 cu.ft working capacity Heavy Duty ThoroBlender® including Liquids Addition Feature and 4" diameter Knife Gate Discharge Valve.
Direct drive side view
Non drive side view with Discharge Valve in top position.
Non drive side view with Discharge Valve in bottom position.
PATTERSON 85-1/2" diameter specially designed ThoroBlender® 10,000 lb capacity ready for Halar coating for mixing of acid based powders.  It is shipped on a specialty designed re-useable shipping pallet.  Blender is equipped with special brackets to assist changing or turning the ring gear.
PATTERSON 1'6" diameter Heavy Duty ThoroBlender®, 1/2 HP, 1/60/115-230V, 304SS, Polished Sanitary Finish
Side view
Close up of discharge valve
Close up of charge port
PATTERSON 85-1/2” diameter, 10,000 lbs, ThoroBlender® Double Cone Blender, SS316L, ready for shipment to be sandblasted and ready for application of special coating against highly corrosive material to be blended.
PATTERSON 8'0” body diameter Heavy Duty ThoroBlender® for blending of finely ground rock (75-95 lbs per cu. ft) with air operated 10" diameter Valve, Cone in 304 Stainless Steel, complete with 40 HP high efficiency Gear Drive and Brake.
Close up of 40 HP High Efficiency Gear Drive with Brake
Close up of Drive End Trunnion.
Close up of Air Operated Discharge Valve